Best Way To Smooth Buttercream Icing
Decorating By Roxiecat123 Updated 15 Oct 2013 , 2:05pm by imagenthatnj
What is the best way to get really smooth butter cream icing? 
do a google search for "smooth buttercream cakecentral", and you'll find all sorts of previous threads on this subject. You can try the forum search here on the site, but it's much easier just to use a search engine.
I let my buttercream crust and then use wax paper and a spatula. It makes it really smooth.
Two videos on You Tube.
http://www.youtube.com/watch?v=iqvL4zhVbE8&feature=related Serious Cakes (be careful watching her videos - hours will pass by!!)
http://www.youtube.com/watch?v=dIXHFqpJK84&feature=related Edna
the best tool i have found for getting buttercream smooth is actually not a cake tool. i went to the plaster and paint dept at walmart and got plaster/putty knives. they came in a set of 3 and are great because you have 3 different sizes so no overlapping no matter how tall the cake is. and they were super cheap. the set was $1.50 
AHi all I keep trying to get my buttercream icing smooth and I am at a point where I dont know if I am just not able to perfcect it or am I being too finicky. I have attached a pic I will be adding accents on this cake but this is as smooth as it gets for me. This is after viva, wax paper , hot knife !! Tried it all !! Pls critique thanks [ATTACHMENT=1330]20131011_061617.jpg (2,422k. jpg file)[/ATTACHMENT]
The best way for me to get smooth icing is to put way more icing on the cake than I need, use a pastry scraper to take it off slowly and usually by the time I have it even with the board, it's fairly smooth. I then place it in the freezer for about 10 mins until it firms up and then use a hot scraper to touch it up.
Hi Kblickster and Gees
Thanks for your replies... but I have been using paper towel, hot knife and seen all possible info out there. I have see all the videos.
My question is if you see the pic I have posted... is it possible to get smoother than this ? if yes then i guess just need to keep practising. :(
The recipe I use is half butter n half crisco
It is possible to get it much smoother. Try getting a pastry scraper and use it instead of a knife. Are you using a turntable?
hey! this is the post!
Sorry if you mentioned this Pritinash, but just to be sure - you ARE using an american style buttercream? Your picture kinda looks like a meringue buttercream and I don't want you to drive yourself crazy trying to towel-method a meringue buttercream. They are two ENTIRELY different beasts!
Smoothing any meringue buttercream requires overapplication and subsequent removal of frosting with a sharp straight tool, whether bench scraper, metal ruler, t-square, or putty knife, and it just takes a lot of practice. American buttercream is more about manipulation of the surface, whether with plastic wrap, viva, wax paper, or fondant smoothers. Just making sure . . .
I agree with Sadiep on overapplication. I'm in Australia and only use SMBC not American crusting buttercream. To get it smoother I put one layer of SMBC on the cake, roughly smooth it, put it in the freezer for 20 mins to firm up then put a second coat on quite thickly. Then use a metal scraper (bench scraper will do) and firmly scrape off excess. Get a bowl of boiling water and your bench scraper/metal scraper, dip the edge you are using on the cake into the boiling water for a few seconds, touch it onto the surface of a clean cloth to take off excess water. The heat of the metal is going to smooth your cake, not the water and smoothly run it around the edge of your cake. Repeat the dipping in boiling water/cloth process over and over around your cake and do similar on the top. The rim is the hardest thing to get right. Looking at your cake I don't think you are applying enough pressure while you are scraping off the excess. If you scrape firmly there won't be any hollows in your buttercream. Oh and then practice, practice, practice.
There's another thread going on here:
http://cakecentral.com/t/764857/get-really-smooth-fondant-like-buttercream
Quote by @%username% on %date%
%body%