Wonder Mold Rod

Decorating By Londonchic Updated 6 Nov 2013 , 3:18pm by ZoeF

Londonchic Cake Central Cake Decorator Profile
Londonchic Posted 15 Sep 2008 , 9:44am
post #1 of 8

I've lost the heating rod for my wilton wonder mold pan. Do you know if I can get that part to buy? Or what can I use instead?

7 replies
debster Cake Central Cake Decorator Profile
debster Posted 15 Sep 2008 , 10:53am
post #2 of 8

I would email www.wilton.com and ask them or I have heard some say that they have rolled foil into a long stick and used that. It didn't work for me though. Good luck.

Kitagrl Cake Central Cake Decorator Profile
Kitagrl Posted 15 Sep 2008 , 11:20am
post #3 of 8

A long time ago, Wilton sent me one for free....

TooMuchCake Cake Central Cake Decorator Profile
TooMuchCake Posted 15 Sep 2008 , 1:04pm
post #4 of 8

I bought a WonderMold at the thrift shop that didn't have a heating rod. I emailed Wilton and they sent me one for free. I offered to buy it, but they gave it to me. Props to Wilton!!


PattyT Cake Central Cake Decorator Profile
PattyT Posted 19 Sep 2008 , 5:47pm
post #5 of 8

I just bought a new wondermold - but true to my "tool time" instincts, thought the core was too small. I also have to put Barbie legs in, and didn't want to core it out too much.

Buy a threaded bolt about 2" long. Make sure it it thin enough to fit through the hole in the base and mold pan. Buy several nuts to stack on top. They don't need to thread, just stack. Only the last one should thread to hold the others. This bolt and nuts is creating a "stump" for the final piece. Lowes sells 12' pre-cut lengths of copper pipe. I think mine it is 1/2" inside (not sure, I'm at work). It should drop down over the stack of nuts; it should pretty steady if the stack is tall enough.

The cake baked beautifully. But, I haven't built the cake though to see how the barbie legs fit inside.

I'll need advice on building a doll cake next - but will search the forums first. I'm sure I'm not the first needing help.

p.s. The bolt and all the nuts were stainless steel. Everything cleaned up nice before baking.

I can take a pic tonight and post if the notes aren't clear - I think clearly...writing it down, not so much.

HTH - Pat

tiggy2 Cake Central Cake Decorator Profile
tiggy2 Posted 19 Sep 2008 , 7:48pm
post #6 of 8

Wilton also sent me one for free. I emailed them to see if I could buy one and they sent it no charge.

PattyT Cake Central Cake Decorator Profile
PattyT Posted 25 Sep 2008 , 1:48am
post #7 of 8

Sorry for the delay...but I now have a spanky new computer! Down for a while but here are photos showing the stem assembly that I rigged for the Wilton Wonder Mold pan.

This is photo explanation of my previous post above.

I have a cake baked using this rig, but haven't assembled the full doll cake yet.

Hope this helps some.


ZoeF Cake Central Cake Decorator Profile
ZoeF Posted 6 Nov 2013 , 3:03pm
post #8 of 8

Thanks for the tips.

Quote by @%username% on %date%