To Dowel Or Not To Dowel... Please Help!!!!

Decorating By elvis Updated 27 Mar 2006 , 11:25pm by elvis

elvis Cake Central Cake Decorator Profile
elvis Posted 27 Mar 2006 , 5:03pm
post #1 of 11

Hi-- I've been asked to do a baby shower cake for this weekend to feed 50. I may do a 14 inch round (3 layers) topped with a 9 inch round cake... or I may just make all the layers 14 inch.

My question is.. in either case, would I need to dowel? I've never done that before. Is it only necessary to dowel when you've got a smaller cake sitting on top of a larger one? Any insight would be so very appreciated!! My worst nightmare would be for a cave in!!!! Thanks!

10 replies
cakebybek Cake Central Cake Decorator Profile
cakebybek Posted 27 Mar 2006 , 5:11pm
post #2 of 11

I would say yes it would be necessary to dowel that size cake with that many layers.

TamiAZ Cake Central Cake Decorator Profile
TamiAZ Posted 27 Mar 2006 , 5:13pm
post #3 of 11

If your going to put the 9" on top of the 14" then you need to use dowels.. If your just using the 14 then there's no need to use dowels because your not putting anything on top of it.

KittisKakes Cake Central Cake Decorator Profile
KittisKakes Posted 27 Mar 2006 , 5:13pm
post #4 of 11

How thick will each layer be? A 2 layer(2" each layer), 14" round will serve a good 60 people. If you are only doing the 14", putting dowels in it won't help unless you have a cake board in there somewhere, but you shouldn't need that. If you stack a 9" on top, then yes, I would put dowels underneath that layer. Make sure there is a cake board under that 9" or the dowels will have nothing to support. Also, this will be a bit heavy, so make sure your base board is sturdy and thick enough to support the weight. There's a tutorial on the front page of this site on how to stack cakes, if that will help any. HTH

Florimbio Cake Central Cake Decorator Profile
Florimbio Posted 27 Mar 2006 , 5:19pm
post #5 of 11

I would put one in, I always do, just so they do not slip...

cakefairy18 Cake Central Cake Decorator Profile
cakefairy18 Posted 27 Mar 2006 , 5:19pm
post #6 of 11

when in doubt, i always dowl, just for my own peace of mind...

tiptop57 Cake Central Cake Decorator Profile
tiptop57 Posted 27 Mar 2006 , 5:23pm
post #7 of 11

Boy oh boy, you would kick your self is something happen to that cake if you did not put in some dowels.......

cookieclaire Cake Central Cake Decorator Profile
cookieclaire Posted 27 Mar 2006 , 5:33pm
post #8 of 11

I would dowel. I did a carrot 3 layered (2 inch layer) 10 inch round, while driving to work with it I could almost see it sliding in slow-mo icon_surprised.gif ! I wished I would of doweled icon_cry.gif The cake was an instant "whimsical" cake. It was ok, everyone liked the cake but still was pretty sad icon_cool.gif

Crimsicle Cake Central Cake Decorator Profile
Crimsicle Posted 27 Mar 2006 , 10:45pm
post #9 of 11

I always dowel...if only to keep the layers aligned. I guess I have a heavy hand, because when I start smoothing the sides, so.metimes I push the layers so much that they get out of alighment I used to just dowel for stacked cakes or if I had a slippery filling....but now I dowel pretty much everything. If I'm just using dowels to prevent layer slippage, I often use drinking straws instead of wood.

klg1152 Cake Central Cake Decorator Profile
klg1152 Posted 27 Mar 2006 , 10:49pm
post #10 of 11

When in doubt dowel - and when your not dowel anyway

elvis Cake Central Cake Decorator Profile
elvis Posted 27 Mar 2006 , 11:25pm
post #11 of 11

Thanks for all of your advice! I guess I'll be using a dowel. thumbs_up.gif

Quote by @%username% on %date%

%body%

 

About

CakeCentral.com is the world's largest cake community for cake decorating professionals and enthusiasts.

Privacy Policy Terms Of Use

Newsletter Subscribe

Follow Us On

Contacts

Phone: 866.878.3133
Email: [email protected]
2004 - 2025 © Cake Central Media Corp. All Rights Reserved.