jeepsterchick Posted 13 Feb 2013 , 4:39pm
post #1 of

I'm looking for 12 x 12 x 8 or 10" tall cake boxes, my decorations tend to be taller than the norm 6" box, so I prop the lid in the open position.   Does anyone have suggestions about where to get that size?  

 

Thank you!

11 replies
Pam1976 Posted 13 Feb 2013 , 4:50pm
post #2 of

Hi.  I used packing boxes that I get at Walmart for about $0.63 or $1.20 a box.  They come in 10x10x24 or 12x12x24 or 14x14x24.  I believe they even have 18x18!  I tape the bottom shut and then cut one of the front panels sides and this way I can slide my cake in and then tape it shut after putting the cake in.  Does this make sense? 

Pam1976 Posted 13 Feb 2013 , 4:52pm
post #3 of

 

This is how I cut it and insert my cake.  The panel that has the sides cut can be taped up again for delivery.

CWR41 Posted 13 Feb 2013 , 4:55pm
post #4 of

How about these?

https://www.bakerycrafts.com/ItemSearchResults.aspx?SrchStr=ds-1a

Pam1976 Posted 13 Feb 2013 , 9:45pm
post #5 of

By the way, I just stopped at Walmart to fill up on boxes and they were $0.68 a piece!  I bought nine of the 12x12 and five of the 14x14!!  

AZCouture Posted 13 Feb 2013 , 10:23pm
post #6 of

I get mine from bakeabox.com now. Love them!!

jeepsterchick Posted 14 Feb 2013 , 8:28pm
post #7 of

Thank you All! - I'm stopping by Walmart tonight!

Krypto Posted 24 Mar 2014 , 6:00pm
post #8 of

AHello all! I know this is an old thread but does anyone know if these boxes are still available at Walmart?

Annie8 Posted 24 Mar 2014 , 6:11pm
post #9 of

They are still available at Walmart.

Krypto Posted 24 Mar 2014 , 6:20pm

A

Original message sent by Annie8

They are still available at Walmart.

Great! Thank you!

eatmycakebaby Posted 24 Mar 2014 , 6:53pm

http://www.youtube.com/watch?v=ZUAt7TfI_H0

 

I used this box and I made it for like 3.50.  Those tiered cake boxes you order off of sites are very expensive.  However I do love Pam's Idea

Fraggle84 Posted 25 Mar 2014 , 3:05pm

AI've just cut small strips of card, folded them in half and stuck to the inside corners of the box to raise the lid. Seems to work well and is really cheap to do. You can get box inserts but they do shrink the internal size of the box and I found it pulled the ribbon from the board :-(

Quote by @%username% on %date%

%body%