Kamstor Posted 20 Nov 2010 , 6:30pm
post #1 of

Well, for those of you were interested in cake shooters I finally made them and let me tell you even though they were a big at the party they are a big pain to make.

My trouble began when trying to find a holder for the shooters. I know you can buy one for about $25.00 that holds 18 shooters but since this was my first time making them I did not want to spend the money on that. So I came up with a flower pot and green foam as a base holder and arranged the shooters to look like flowers.

Next was the hard part filling the shooters. It was almost near impossible to get the right thickness of cake so when they were cut out with a cookie cutter they would not be to thin or to thick and the cake needed to be cooked longer so the cake was not to soft and not to hard to when using the cookie cutter.

After all of this I tried several cookie cutters trying to find the right size so that the cake would cover the edges once placed in the shooter. Found a close size but not exact, after all of this I finally was able to decorate. That went smoothly, however I will never make cake shooters again, I will consider using moose's and berries in them.

27 replies
tiawanna02 Posted 20 Nov 2010 , 6:51pm
post #2 of

do you have a pic of them

KatsSuiteCakes Posted 20 Nov 2010 , 6:57pm
post #3 of

They are adorable, but look like a massive amount of work! Nice job!! thumbs_up.gif

imagenthatnj Posted 20 Nov 2010 , 7:14pm
post #4 of

Kamstor, would it have been easier to make a 1 inch high cake on a sheet pan and then cut the circles?

They look really nice, though! And yes, I don't think they were created to make cake shooters. They're really for refrigerated desserts.

endymion Posted 20 Nov 2010 , 7:38pm
post #5 of

They look really cute!

On another thread about cake shooters, someone had suggested using one of the "shooter" thingies to cut the cake, which I thought was a really good idea!

Jenn2179 Posted 20 Nov 2010 , 7:56pm
post #6 of

Where can you buy the holder for them?

Corrie76 Posted 20 Nov 2010 , 8:02pm
post #7 of

What is a "cake shooter", By the looks of the pic it looks like maybe the plastic shooter injects cake into your mouth (?) They do look cute but I understand about the PITA multi-step-cake projects- I stopped doing cake balls and pops last month- too much labor and everyone thought that since they're small and bite size it should have a "small and bite-size" price.

MariaK38 Posted 21 Nov 2010 , 3:20am
post #8 of

when I made mine, I made mini cupcakes and split them in half. they fit down in the tube really well.
as far as a holder, I was put off by the cost as well. I ended up getting some plastic ice cream cone holders from a restaurant supply store. They were cheaper, and I only bought enough to display 8 at a time at a craft fair. I don't transport them standing up, and they still work out fine.

Kitagrl Posted 21 Nov 2010 , 3:37am
post #9 of

Is that like a pushup popsicle or something?

Seems like you could just push the plastic thing into a thin cake layer...then icing...then press it back into cake...and the pressure of pushing it into the cake, etc, would fill it to the end after you had enough layers...?

Then just wipe the outside edge clean.

Where do you get those plastic things?

blissfulbaker Posted 21 Nov 2010 , 3:59am

I did cake shooters for my son's Habitat for Humanity fundraiser. I used a cookie cutter about the same size as the tube and a mini rolling pin to push the cake down. Once I got the hang of it, all went smoothly. As a holder I bought a large piece of stryofoam and stuck them in it to. The high school age kids loved them. They were the first to sell out at the fundraiser.

hollyheartscuppycakes Posted 21 Nov 2010 , 6:07am

So where do you buy these containers? It's a really fun idea. thumbs_up.gif

MariaK38 Posted 21 Nov 2010 , 2:09pm

hi! to get the containers, check out bake deco dot com or pastry chef dot com. I think wasserstrom dot com has the smaller ones, too.

Kitagrl Posted 21 Nov 2010 , 2:14pm

I know, it would have been fun to send to my kids' school for thanksgiving...

Kamstor Posted 21 Nov 2010 , 10:09pm

Hello Everyone,

I appreciate all of the replies and am feeling a little bit better about trying these again at Christmas time.

Blissfulbaker: I am glad your shooters were a hit. Mine were too, however I am a perfectionist and I could not get mine to touch the sides I did not like them.

Kitagrl: I did try your suggestion, however it did not seem to work. Not sure if the cake was to soft. My cake was very moist and seemed like the top layer was a little gummy. So when I tried to push the plastic top into the cake it just stuck and did not come out even.

MariaK38: I like your suggestion of making them in mini cupcake pans, I may give that a try. When you transported your they were laying down?

Pood: Your cake shooters are AWESOME nice job!!!!! What are you using for a stand?

Imagenthatnj: I think I will try them again but all make some for refrigerated desserts as well.

Tiawanna02: If you would like to see a picture I have them under my photos.

For the rest of ladies I order my shooters through bakedeco.com. I know MariaK38 listed some other websites that carry them as well.

MariaK38 Posted 21 Nov 2010 , 10:16pm

yes, they were laying down in a plastic box. my cupcakes don't touch the sides all the time (sometimes the tops do as they kind of "spread out"), but I made them more secure by piping the frosting around the outside of the cupcake, touching the side of the container. when I transported them, I didn't notice much movement. If there was some, it went back to normal once I stood them up.
Good luck to you for the next time you do them.

GenGen Posted 21 Nov 2010 , 10:56pm

what do you use for cake shooters? i tried doing a search on bakedeco.com but it didn't like me lol

MariaK38 Posted 21 Nov 2010 , 11:18pm

try searching for push pops or push ups.

pood Posted 21 Nov 2010 , 11:48pm

Hi Kamstor,
I used a wire cooling rack to hold the cake shooters. I used upside down cups to elevate the cooling rack and just put the shooters in the holes. Not very elegant but it worked like a charm!

Linda

Becky1679 Posted 8 Mar 2011 , 5:56pm

I just ordered my push-ups and am looking forward to making them...oh, the combinations icon_smile.gif

So, does Sprinkles have a patent pending on the name, or the actual product? Was wondering how this works. If they receive a patent, you can't sell them?

HomemadeUpgrade Posted 11 Mar 2011 , 7:17pm

Where did you purchase the containers for these? I have searched the internet high and low and can't find any. Please help! icon_smile.gif

Becky1679 Posted 11 Mar 2011 , 7:34pm

Aha! So did I...everyone seems to be sold out!

http://www.martellatousa.com/product.jhtm?id=638&cid=22

SucreSucre Posted 11 Mar 2011 , 7:44pm

Try JB Prince, at one time they carried two different sizes.
HTH!

HomemadeUpgrade Posted 11 Mar 2011 , 7:55pm

Thanks! icon_smile.gif

SucreSucre Posted 11 Mar 2011 , 8:13pm

You're welcome! thumbs_up.gif

Baileyx2 Posted 7 Nov 2011 , 2:17pm

We spent quite a bit of time experimenting to find the best process. In the end we used a 1 1/2 inch piece of metal pipe (found in the plumbing department of the hardware store) and a piece of 1 inch PVC (also found at the hardware store). Cut the cake with the metal pipe (cuts smoother) and push it out with the PVC. If you have 2 people working together it is very simple. One of us cut and popped the cake into the shooter and the other frosted and we just handed them back and forth.. We did 24 in about 5 minutes. We used an upside down plastic tray used by the soft drink companies (with holes in them) to hold them upright. We have a party for 175 coming up and will put them in a 2x6 with holes in it to stand them up. I carried them in a tote bag to work (show and tell..lol) and they help up perfectly.

Has anyone frozen these and served them a several days later? We would like to do this but I am concerned about how they will hold up and taste.

amaryllis756 Posted 10 Nov 2011 , 10:59am
Quote:
Originally Posted by tiawanna02

do you have a pic of them




I didn't see any pic. Can you try again? I would love to see the pics.

You can also get them on ebay. In different quantities. You don't have to buy 100. I just searched "push up containers" and got the results I wanted. HTH

ChristysConfections Posted 3 Feb 2013 , 11:09pm

I have an order for these next week. I'm wondering if you'd flash freeze the cakes before cutting if it would be easier to manage? Any ideas?

7sweets7 Posted 21 Jul 2013 , 7:34am

AU can buy it at michaels

Quote by @%username% on %date%

%body%