deijha Posted 29 Nov 2009 , 8:04pm
post #1 of

Hi all, I thought you might be intered in seeing my invention. Everytime I had to work on the side of a cake I could never get it truly eye leve. I told my husband, "I ndd a table high enough that when I work on a cake it is eye level and I can sitll spin it". So we started on what it would take. This table is the result. DIRECTIONS: We weighted the bottom of the cupboard with 2 x 6's screwed on and to put the wheels on (I wanted to be able to move it easily). We used a cabinet because it was ready made and offered extra storage. (the only thing I would have done differently was get the next largest size because it can be tippy when I move it). We attached a swivel kit to the top so it would spin (the part that makes a bar stool set spin. Its 2 metal pieces with ball bearings between them to spin. I got mine a Menards). Next I sat in the chair to measure the height that was needed. We attached the upright pieces to make the height. They are about 6 to 8 inches, remember you have to add the height of the table top. We put cleats on the round top to fit snugly inside the uprights and screwed them to the uprights. That way if the top or the swivel kit gets messed up we can remove it easily and replace. Now when I need to do sides of cakes, it is eye level and I'm not breaking my neck or back.

Here are some pictures of it.
Thanks
Jeanne

37 replies
deijha Posted 29 Nov 2009 , 8:08pm
post #2 of

Wow, I should have done a spell check on that, please excuse the misspelling.
Jeanne

HowCoolGomo1 Posted 29 Nov 2009 , 8:24pm
post #3 of

Who cares about your spell check. I've owned the best turntable for over 20 years.

I won't let anyone take it apart, YES IT'S THAT SPECIAL!!!~


You just built my turntable!

Thank you!

deijha Posted 29 Nov 2009 , 11:24pm
post #4 of

WOW, well ok then. Have a nice day.
Jeanne

flamingobaker Posted 29 Nov 2009 , 11:45pm
post #5 of

That is a great idea! Thanks! icon_biggrin.gif

deijha Posted 30 Nov 2009 , 12:16am
post #6 of

Thanks Flamingobaker

aej6 Posted 30 Nov 2009 , 12:40am
post #7 of

EXCELLENT idea! Nice job!

cathyscakes Posted 30 Nov 2009 , 1:16am
post #8 of

Hey Jeanne, great idea, aren't hubby's wonderful

Peridot Posted 30 Nov 2009 , 2:06am
post #9 of

What did you cover your turntable with?

tatorchip Posted 30 Nov 2009 , 2:16am

deijha, that is an awesome idea, I will have to get my dh to check this out, wow another Christmas present. That makes two today. Yeah

jammjenks Posted 30 Nov 2009 , 2:22am

This is a wonderful idea!

Cristi-Tutty Posted 30 Nov 2009 , 2:27am

wow this is so good...thank you for sharing

all4cake Posted 30 Nov 2009 , 3:18am

This is really a great item! Thank you for sharing the how tos for it! (Now, I gotta figure out how to stratecally bring this thread up when DH is near the puter)

chefjulie Posted 30 Nov 2009 , 3:20am

LOVE IT!! I just informed my husband that I am expecting a similar invention for my birthday in 2 weeks icon_smile.gif It'd be really great if we could find a base cabinet that would hold a large marble top....

Doug Posted 30 Nov 2009 , 3:25am

(pondering how to add a hydraulic jack or some other lifting device such as used for pop up/hi-low campers & trap doors so as to make it height adjustable)

(also pondering how to make it so top could be removed and replaced with marble slab)

----
fyi -- if you've got the marble slab -- finding a base cabinet is as easy as measuring the slabs width and length and then going to Lowes, Home Depot or other cabinet purveyor. Even if cabinet is off a tad -- a 3/4" plywood or MDF top will compensate (marble rests on the wood top)

chefjulie Posted 30 Nov 2009 , 3:33am

Ooooh! The hydraulic lift would be awesome! I would LOVE to hear any design schemes you come up with. I would like a spinning, hydraulic marble top that extends a bit passed the edge of the cabinet (so I can slide my stool under the top to work)... I dont ask for much, do? icon_biggrin.gif

adonisthegreek1 Posted 30 Nov 2009 , 3:49am

Neat! I've had my husband design a few inventions out of necessity as well. We keep talking about getting patents...maybe one day.

deijha Posted 30 Nov 2009 , 4:28pm

Thanks everyone, I was hoping others would like this idea. Any modifications you want to do,,, go for it. I would have loved a marble top too, but could not figure out how to attach it.
Jeanne

deijha Posted 30 Nov 2009 , 5:31pm

Peridot, Usually I have my cakes on a cake board so that isn't an issue for me, but if I need to I just put a clear plastic cover, I have that is clear plastic table cover so its food grade.
Jeanne

chelleb1974 Posted 2 Dec 2009 , 7:06am

Deijha, that's awesome!! I've been trying to figure out how to get a rolling cart for my kitchen and cake stuff without spending hundreds of dollars. I think I'm going to go check out prices of cabinets and add wheels onto it! Thanks for the idea!!!

JenniferMI Posted 2 Dec 2009 , 1:03pm

Great idea!

Jen icon_smile.gif

SugarFrosted Posted 2 Dec 2009 , 7:19pm

Wow! Excellent idea! You can also put a floor length tablecloth and a lamp on it to use in another room if you need to save space in the kitchen. Well done!

deijha Posted 3 Dec 2009 , 8:04pm

Yes it can be wheeled around most anywhere you like. I think the cabinet cost like $29.00 and the round was about that also, and the swivel and wheels where the only other expense, we had the other wood left over from other projects. I also like it because I can stand at it to place items on cakes without bending over. The older I get the less I like to bend and hunch over LOL.
Jeanne

HowCoolGomo1 Posted 4 Dec 2009 , 3:00am

Sorry, I didn't state it correctly.

You have designed my next turntable.

bobwonderbuns Posted 4 Feb 2010 , 4:19pm

That's a very cool idea! Thanks for sharing! icon_biggrin.gif

mamawrobin Posted 4 Feb 2010 , 4:35pm

Great idea! Thanks for sharing thumbs_up.gif .

CarolAnn Posted 4 Feb 2010 , 4:55pm

Cool idea!! I suggest wheels that lock.

CarolAnn Posted 4 Feb 2010 , 4:59pm
Quote:
Originally Posted by HowCoolGomo1

Who cares about your spell check. I've owned the best turntable for over 20 years.

I won't let anyone take it apart, YES IT'S THAT SPECIAL!!!~


You just built my turntable!

Thank you!




HowCoolGomo1 - About this turntable of yours. Do tell!! I've been wanting to make one with the rectangle on one side and big round on the other. What is your "best turntable for over 20 yrs" like?

kikibakes Posted 4 Feb 2010 , 9:20pm

Great idea! thanks for sharing! icon_smile.gif

ckckhome Posted 5 Feb 2010 , 2:25pm

Wow, I got to have this one, my hubby just cannot keep up with all the honey do's I have him doing since I have really been surfing this site. Thanks for sharing

Quote by @%username% on %date%

%body%