| Author |
Message |
lauralee422
Regular Member
Joined: Nov 09, 2007
Posts: 155
|
 Posted:
Mon Aug 04, 2008 1:12 pm |
  |
Hey All! I am trying to create a picket fence out of fondant to be flush against my cake. It is going to be the bottom layer of a three tiered cake. So I wanted to do green fondant with a white picket fence on top of it..Would u suggest cutting them free hand and laying them on one at a time, not dried out?? Also, would u connect it with a thin line? As always, any thoughts would be greatly appreciated! |
|
|
    |
 |
|
|
|
BakingGirl
Forum Addict
Joined: Sep 19, 2006
Posts: 737
Location: The Caribbean
Birthday: Aug 06
|
| Posted:
Mon Aug 04, 2008 1:31 pm |
|
If the fence will be higher than the cake, ai not have any support behind it on the top, then I would do the fence first and dry it. That way it won't sag at the top. If the fence is fully supported by the cake I'd do it straight on the cake.
I would connect with a thin line. You could probably pipe it on in RI, or extrude with a clay gun to speed it up a bit. Otherwise it could be fiddly. |
|
|
 |
|
|
nefcook21
Regular Member
Joined: Dec 03, 2004
Posts: 111
Location: North Texas
Birthday: Jul 21
Gallery Supporter Member
|
| Posted:
Mon Aug 04, 2008 1:31 pm |
|
Lauralee--I made a cake with a picket fence and I had a pattern and cut out the fence and put it on the cake not dried. if you will pm me with your email I will send you the pattern I used. |
|
|
|
|
|
jules1719
Regular Member
Joined: Jul 30, 2008
Posts: 127
Location: location location
|
| Posted:
Mon Aug 04, 2008 1:33 pm |
|
Why use fondant? Make the pickets out of gumpaste. They will be more refined (thinner, less clunky) and can be made ahead of time. Attach with a dot of royal icing. |
|
|
|
|
|
vagostino
Junior Member
Joined: Apr 04, 2007
Posts: 61
|
| Posted:
Mon Aug 04, 2008 1:35 pm |
|
i would cut the whole thing on a strip using a template...maybe look for one online, and then apply it to the cake as a border let's say. Don;t let it dry too much or it will crack when it curves to take the shape of the cake. Just my two cents cause i never done it before. I just think if you cut piece by piece it will have to be perfect alignement to minimize the seams. |
|
|
|
|
|
Mencked
Forum Addict
Joined: Jan 04, 2007
Posts: 593
Location: Oklahoma
Birthday: Jul 08
|
| Posted:
Mon Aug 04, 2008 1:43 pm |
|
I made a picket fence that extended above my cake. I used a fondant/gumpaste mixture, cut the pieces out using a straight edge and pizza cutter and allowed them to dry before putting on the cake--you can see the fence in my avatar. I just glued the fence onto the BC frosted cake with more BC. |
|
|
|
|
|
cmyoung5
Regular Member
Joined: Dec 13, 2006
Posts: 199
Location: Michigan
Birthday: Oct 05
|
| Posted:
Mon Aug 04, 2008 1:45 pm |
|
I made a template and cut mine out of fondant. It's on the Clifford Cake in my pics. |
|
|
|
|
|
cmyoung5
Regular Member
Joined: Dec 13, 2006
Posts: 199
Location: Michigan
Birthday: Oct 05
|
| Posted:
Mon Aug 04, 2008 1:45 pm |
|
I made a template and cut mine out of fondant. It's on the Clifford Cake in my pics. |
|
|
|
|
|
Price
Forum Addict
Joined: Sep 04, 2005
Posts: 909
Location: Maryland
Gallery Supporter Member
|
| Posted:
Mon Aug 04, 2008 2:02 pm |
|
I also made a template and made sections of the fence at a time. I was putting them on a round cake and like you said wanted them to fit flush against the cake. So - I put them on while they were still somewhat pliable so that the fence would conform to the round shape of the cake. I thought they lined up pretty well. I cut mine using an exacto knife. |
|
|
|
|
|
lauralee422
Regular Member
Joined: Nov 09, 2007
Posts: 155
|
| Posted:
Mon Aug 04, 2008 5:00 pm |
|
Thank you all so much for the great advice and nefcook21 for the template. I am going to try to print out a template and use gumpaste and do a few the day before the cake. Wish me luck!!!! |
|
|
|
|
|
lauralee422
Regular Member
Joined: Nov 09, 2007
Posts: 155
|
| Posted:
Mon Aug 04, 2008 5:00 pm |
|
Thank you all so much for the great advice and nefcook21 for the template. I am going to try to print out a template and use gumpaste and do a few the day before the cake. Wish me luck!!!! |
|
|
|
|
|
Lady_Phoenix
Regular Member
Joined: Mar 07, 2008
Posts: 194
Location: Charlestown, Indiana
Birthday: Nov 21
|
| Posted:
Mon Aug 04, 2008 5:07 pm |
|
One thing you can also do to be sure it conforms to the cake is get a piece of styrofoam or a cake dummy, lay the pieces on that to dry. I did that with a banner for the front of a cake and it fit perfectly. |
|
|
  |
|
|
lauralee422
Regular Member
Joined: Nov 09, 2007
Posts: 155
|
| Posted:
Sun Aug 31, 2008 3:24 pm |
|
Hi I ended up using an exacto knife also and made my fence in sections, I tried to apply to the cake while it was still pliable but the top of the fence was above the cake so I had to let it dry a bit. I didn't have styrofoam although that was a great idea.. I ended up just using the cake pan. It was ok, but the pcs didn't line up properly and I was a bit dissapointed. Oh well, next time I know! The cake is in my photos in case you'd like to check it out. Thanks again for all the advice. Everyone still loved the cake including the birthday boy! |
|
|
|
|
|
|
|
